Content 7L = +/- 7 m2
Instant Beton Cire is an ready to use, color-mixed microcement which is suitable for many applications. Use Instant Beton Cire for making furniture, bathroom walls, toilet or even on floors. Thanks to a unique composition of materials, the instant Beton Cire is very durable and flexible. Extremely usable for any desired place in your house!
Because Instant Beton Cire is waterproof by itself, it is very suitable for use in wet areas like the bathroom. Thanks to the special coating even lime and other dirt don't stand a chance.
Another unique feature of Instant Beton Cire is that it can be used on any surface. Directly on plaser, cement, wood is not a problem. Use the HoC primer and the Instant Beton Cire can be processed directly.
Step 1
Make sure the surface is flat and free of grease. All bumps, cracks or loose parts must first be repaired or removed before starting to apply Instant Beton Ciré.
If the surface is not yet completely flat, it must be leveled beforehand. First treat the surface with a primer. For a damp room it is best to use cement-bound mortar and for non-damp rooms plaster-bound mortar.
Step 2
Make sure the surface is dust and grease free.
Step 3
Cover any surrounding surfaces that should not be covered with splashes with tape and possibly plastic.
Step 4
Shake the Primer before use. If the surface is very absorbent, you can dilute the primer 1 to 1 with water. For non-absorbent surfaces you can apply the primer undiluted. Apply the primer evenly with a roller or block brush and let it dry for 12 hours.
Step 5
Apply the 1st layer of Beton Ciré as evenly as possible with a taping knife or trowel, in a layer thickness of 1 - 3 mm. Make half-circle movements and play with large and small movements to discover what you like best. the 1st layer should dry for 4 - 8 hours.
(do not let this layer dry out completely so that any unwanted effects can be removed when applying the second layer).
Step 6
Apply the 2nd layer of Beton Ciré with a taping knife of trowel in a layer thickness of 1 - 3 mm and let this dry for 12 hours.
Step 7
Mix the 2-component Finish Coat by stirring it well for at least 10 minutes. Then apply it in two layers with a clean cloth or microfibre roller. The second layer can be applied as soon as the 1st layer is touch dry, let the total layers of finish coat dry for 12 hours.
(Mix the components in the required amount per layer, so that it cannot dry out in the meantime).
✅ Ready to use
✅ Mixed in color
✅ Easy to apply
✅ Scratch resistance
✅ Waterproof
✅ In 8 different colors
